產品介紹 Product introduction

硅橡膠 silicon rubber

硅橡膠是非石油產品，不依賴日益緊缺的石油資源，使得硅橡膠制品成為同類塑膠制品的代替品已經是大勢所趨，硅橡膠耐低溫性能良好，一般在-55℃下仍能工作。硅橡膠的耐熱性能也很突出，在180℃下可長期工作，稍高于200℃也能承受數周或更長時間仍有彈性，瞬時可耐300℃以上的高溫。硅橡膠具有生理惰性，硅膠無毒，無味，無臭，與人體組織不粘連，具有抗凝血作用，對肌體組織的反應性非常少。特別適合作為醫用材料，同時硅橡膠制品可以應用到有很多塑膠制品不能做到的用途領域，如嬰兒奶嘴等，應用前景非常廣闊。硅膠產品全部能通過美國FDA認證，SGS認證和歐洲LFGB認證，實現無障礙入市。

Silicone rubber is a non petroleum product and does not rely on the increasingly scarce petroleum resources. It is a general trend that silicone rubber products become a substitute for similar plastic products. Silicone rubber has good low temperature resistance and can still work at - 55 ℃. The heat resistance of silicone rubber is also outstanding. It can work for a long time at 180 ℃, and it can withstand several weeks or more at a temperature slightly higher than 200 ℃. It still has elasticity, and can withstand high temperatures above 300 ℃ instantaneously. Silicone rubber is physiologically inert, silica gel is non-toxic, tasteless, odorless, does not adhere to human tissue, has anticoagulant effect, and has very little reactivity to human tissue. It is especially suitable for medical materials. At the same time, silicone rubber products can be applied to many application fields that plastic products can not do, such as baby pacifiers, and the application prospect is very broad. All silica gel products can pass FDA certification, SGS certification and European lfgb certification to realize barrier free entry into the market.

硅膠刻字膜 Silica gel lettering film

硅膠刻字膜是使用硅橡膠為基礎材料，添加色粉后做成薄膜狀，再在硅膠表面貼合熱熔膠而成硅膠刻字膜。

Silicone lettering film is made of silicone rubber as the basic material, added toner to make a film, and then bonded with hot-melt adhesive on the surface of silicone to form silicone lettering film.

硅膠刻字膜產品用途：Application of silica gel lettering film

用沖壓或刻字機做成需要的LOGO圖案，適用于運動服、休閑服、T恤衫、廣告衫、文化衫、箱包、鞋帽、圍裙等產品。

The logo pattern made by stamping or engraving machine is suitable for sportswear, casual wear, T-Shirts, advertising shirts, cultural shirts, bags, shoes and hats, aprons and other products.

產品特性：Product features

1、有較好的防升華的效果。

2、硅膠產品屬環保的材料，熱轉印硅膠標無毒無味，耐酸、堿、鹽 ，耐腐蝕，高溫不粘結，低溫不開裂，不退色。

3、表面具有膚感，手感像嬰兒皮膚般順滑、層次豐富、色澤鮮艷亮麗、柔軟光滑。

4.耐洗水，高彈性、粘牢固、。

5方便：直接燙壓到服裝、鞋、帽、箱包等。

1. It has good anti sublimation effect.

2. Silica gel products are the most environmentally friendly materials. The heat transfer silica gel label is non-toxic and tasteless, acid, alkali and salt resistant, corrosion-resistant, non binding at high temperature, non cracking and non fading at low temperature.

3. The surface has a skin feeling, and the hand feels like a baby's skin, with rich layers, bright colors, soft and smooth.

4. Washable, highly elastic, firm and.

5 convenience: directly press clothes, shoes, hats, bags, etc.

燙壓方法 Hot pressing method

1、燙印前把溫度時間調好，溫度設置在145度，壓燙時間15秒，壓力5KG左右。

2、燙印圖案前先把需燙的衣服先壓燙一下，看看會不會冒熱氣，因怕衣服受潮把圖案 燙上去影響產品的牢度。

3、燙印后的圖案還是熱時就不應去拉動圖案。

4、熨燙或水洗洗，如有局部未燙牢跡像，可將轉移紙覆蓋在圖像上，重新熨燙粘接，切勿 用熨斗直接熨燙轉印部分。

5、不能使用蒸汽槍，水汽會影響轉印效果。建議使用平板燙畫機燙印。若使用專業燙畫機，溫度設定在145度，時間約15秒（時間視物料而定）。

1、 Before hot stamping, adjust the temperature and time, set the temperature at 145 ℃, press the hot stamping time for 15 seconds, and the pressure is about 5kg.

2、 Before hot stamping the pattern, it's best to press the clothes to be ironed first to see if there will be hot air. For fear that the pattern will be ironed by moisture, which will affect the fastness of the product.

3、 When the hot stamping pattern is still hot, you should not pull the pattern.

4、 When ironing or washing, if there is a part of the image that is not ironed firmly, the transfer paper can be covered on the image and ironed and bonded again. Do not iron the transfer part directly with an iron.

5、 Do not use a steam gun. Water vapor will affect the transfer effect. It is recommended to use a flat hot stamping machine for hot stamping. If a professional hot stamping machine is used, the temperature is set at 145 degrees and the time is about 15 seconds (the time depends on the material).